QTR-Quadtone RIP

--- In QuadtoneRIP@yahoogroups.com, "johncjmd" <johncjmd@...> wrote:
>
> I have begun making satisfactory B&W prints as I noted in my last
> post, which was answered helpfully.  So now I am trying to create my
> own version of the 3MK-EpsEnhancedMat curve from scratch for my R800
> per the EyeOne folder.  After lots of problems initially with the
> Measure tool I got what seemed to be several good readings of the 21x4
> random tif printed with QTR.  But I get an out file that states the
> Lab values are not in order and cannot be linearized.  I believe the
> problem is that the 100 step has a lower density than the 95, so this
> ruins the linearity.  This took me a long time and I got similar
> errors with earlier attempts.  The EyeOne is working well according to
> the Diagnostic program, and I used it to make good ICC profile for UC
> inks on glossy paper, and to calibrate my monitor. Any on or off post
> suggestions gratefully accepted.
>

Hello John, that often happens when too much ink is being applied.  Check out Paul 
Roark's website and this page:

http://www.paulroark.com/BW-Info/Fine%20Tuning%20the%20Dmax.pdf

It's for a different workflow but the principal is the same within your curve construction.

Cheers, Robert