QTR-Quadtone RIP

That file contains the following curves:

UT7-EEnhMatte-carbon.qidf
UT7-EEnhMatte-carbon.quad
UT7-EEnhMatte-cool.qidf
UT7-EEnhMatte-cool.quad
UT7-EEnhMatte-sepia.qidf
UT7-EEnhMatte-sepia.quad
UT7-EPSG-cool-PKN-GLOP.qidf
UT7-EPSG-cool-PKN-GLOP.quad
UT7-EPSG-cool-PKN.qidf
UT7-EPSG-cool-PKN.quad
UT7-EPSG-neutral-PKN-GLOP.qidf
UT7-EPSG-neutral-PKN-GLOP.quad
UT7-EPSG-neutral-PKN.qidf
UT7-EPSG-neutral-PKN.quad
UT7-ISP-cool-PKN-GLOP.qidf
UT7-ISP-cool-PKN-GLOP.quad
UT7-ISP-cool-PKN.qidf
UT7-ISP-cool-PKN.quad
UT7-ISP-neutral-PKN-GLOP.qidf
UT7-ISP-neutral-PKN-GLOP.quad
UT7-ISP-neutral-PKN.qidf
UT7-ISP-neutral-PKN.quad

The curves will show up in QTR with these names. There aren't any curves
with the names you mentioned earlier. 

EEnMatte = Epson Enhanced Matte
EPSG = Epson Premium Semigloss
ISP = Ilford Smooth Pearl

You can right click the curve name in QTRGui to show a curve graph. This
lets you see which inks are part of the curve. You could compare the two to
see if they're the same or not.

--
Daniel Staver
http://daniel.staver.no 


> -----Original Message-----
> From: QuadtoneRIP@yahoogroups.com 
> [mailto:QuadtoneRIP@yahoogroups.com] On Behalf Of SteveZ
> Sent: 6. juli 2005 01:21
> To: QuadtoneRIP@yahoogroups.com
> Subject: [QuadtoneRIP] Re: QTR+UT7 Inks+2200 - Am I Stupid or What?
> 
> Yes, Tom, I am using a PC with a Windows XP platform. Daniel 
> Staver was kind enough to share some of his curves for UT7 
> inks for QTR. 
> http://download.petraflux.com/qtr_ut7_profiles.zip
> 
> --- In QuadtoneRIP@yahoogroups.com, "Tom Moore" <r.t.moore@r...>
> wrote:
> > Steve
> > 
> > What is the source of the curves you are using? The names
> (although they
> > seem to be applicable) don't match the 2200 UT7 curves I received
> in my
> > distribution of QTR. Since you're using QTRgui, I presume you are
> using a
> > PC.
> > 
> > Tom Moore
> > 
> > > -----Original Message-----
> > > From: QuadtoneRIP@yahoogroups.com
> [mailto:QuadtoneRIP@yahoogroups.com] On
> > > Behalf Of SteveZ
> > > Sent: Tuesday, July 05, 2005 6:39 PM
> > > To: QuadtoneRIP@yahoogroups.com
> > > Subject: [QuadtoneRIP] QTR+UT7 Inks+2200 - Am I Stupid or What?
> > > 
> > > I've been testing QTR with UT7 inks using step wedges for EEM
> (using
> > > the 21 step wedge for gray matte) and I find that all my tones
> look
> > > the same.
> > > 
> > > Am I not using the curves properly in the QTR Gui?
> > > 
> > > For instance, in the drop down curve box, I have "UT7-2200 EEM-
> Cool-1"
> > > on the left side and "UT7-2200 EEM-Cool-1" on the right side
> or "UT7-
> > > 2200 EEM-Neutral-1" on the left side and "UT7-2200 EEM-Neutral-
> 1" on
> > > the right side. But all the tones look the same, unlike when I
> use UC
> > > inks and the UC Curves where there is distinct noticeable
> difference
> > > in tones from cool to warm.
> > > 
> > > I must be doing something wrong, but what?
> > > 
> > > Can anyone help here?
> > > 
> > > 
> > > 
> > > 
> > > 
> > > Yahoo! Groups Links
> > > 
> > > 
> > > 
> > >
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
>