QTR-Quadtone RIP

--- In QuadtoneRIP@yahoogroups.com, "Ron Faris" <shutterbug52@...> 
wrote:

> I am developing my own curves and ICC profiles for QTR and Epson 
Velvet Fine Art for a 
> Epson 2200 printer.  Everything looks great except my 95 and 100 
wedges are identical.  Can 
> anyone please tell me what is the best way to correct this problem.  
When I printed the 
> calibration page, I chose an ink limit of 65% black ...should this be 
lower.  

That sounds the most logical approach to me. I suggest you go back to 
the first calibration page you printed (should have been with ink limit 
100%) and check again the ink limit you need to prevent the above. 
Might be 60% or 55%?

Success!

Joost