QTR-Quadtone RIP

yes, me too


--- In QuadtoneRIP@yahoogroups.com, "Johnny Eades" <jeades1@...> wrote:
>
> I just downloaded the new 2.4.0 version of QTR and when opening a
> curve an error message is generated about too many errors in ink
> description and lists all the inks listed in the profile being used
> with the message error in ink description and lists the line number.
> I've tried opening your curves and also mine I've created. Has anyone
> else reported this error?
> 
> Your friend in Photography,
> 
> Johnny Eades
> 
> 
> 
> 
> --- In QuadtoneRIP@yahoogroups.com, "Roy Harrington" <roy@> wrote:
> >
> > QuadToneRIP version 2.4.0 Release Notes
> > 
> >    QTRgui version 2.4.0.1
> >    QTR-Create-ICC version 2.4.0.0
> >    QTR-Create-ICC RGB version 2.4.0.0
> >    QTR-Linearize-Data version 2.4.0.0
> > 
> > This release may be installed directly over older versions.
> > 
> > All new profiles for Neutral K7 ink printers: 21/2200, 4000,
> 76/9600, R8/R1800.
> > 
> > Printer enhancements:
> > 
> > R2400 - added printing resolution of 1440x1440 dpi & 1440x1440 super
> >   (probably the best compromise between speed and quality)
> >   
> > R1800 - added support for Manual-Roll feeder for heavy papers
> > 
> > The QTR-Create-ICC & Linearize-Data tools now have the capability to
> average
> > several measurements.  There is a new target and a reference file
> > for a 21x4 stepwedge.  The 21 steps are printed out four times and
> > you should scan/read all of them.  I believe this method should give
> the best profiles.
> > 
> > QTR-Create-ICC-RGB now supports the incorporation of Photoshop .acv
> curves.
> > This allows usage of RGB Epson driver where ink partitioning is done
> with PS curves,
> > including the linearization of the grayscale output.  This greatly
> simplies the workflow.
> > Before, one needed to take a grayscale image, convert to RGB, apply
> ACV curves, and then
> > print.  Now this is all included in the ICC printing profile with
> the added benefit that
> > color management will automatically convert from the grayscale
> embedded profile.
> > The profile can also be used for soft-proofing in most cases.
> > 
> > QTRgui now checks that you have used a Curve/Profile in printing
> > 
> > Roy
> > www.quadtonerip.com
> >
>