QTR-Quadtone RIP

John,

I use an i1 spectro, but I think you will be fine with a densitometer.  Do the ink seperation 
and partitioning with the 3 blacks the same way you did it with your monotone inks.  From 
my experience, and from what I have seen on this forum, and in the misc. documentation 
- adding toners is very touchy feely.  Your going to have to eyeball what seems right to 
you.  It doesn't take much.

Good luck!

Josh


--- In QuadtoneRIP@yahoogroups.com, "Mr_Misty_44" <jharvey@i...> wrote:
>
> 
> I Have a densitometer. Is this all I need to make profiles using 
> Ultracrome and K3 Inks. I believe this is all I'd need to make the 
> profile using only the black and gray inks, but what about the toned 
> profiles. Do I need an Eye-one or PrintFixPro to do these. If not how 
> do I go about incorporating the colored inks into the profiles. I've 
> been using QTR with dedicated B&W inks. I need to know how to go about 
> it with the color inks. Please clear this up  for me.
> 
> John H
>