Different printer, but that happened on the R200 when one of the inks was assigned, but the description generated no ink.
Best regards,
John Moody
-----Original
Message-----
From: QuadtoneRIP@yahoogroups.com
[mailto:QuadtoneRIP@yahoogroups.com]On Behalf
Of Tom Husband
Sent: Sunday, November 06, 2005
6:24 PM
To: QuadtoneRIP@yahoogroups.com
Subject: [QuadtoneRIP] 2200
Printing Problem
QTR 2.3.10
Quad2200-UT7 ink
XP
I'm trying to
run an ink density calibration but when I print the
paper will just
travel all the way through the printer without
printing or it
will just start to go through and stop. The first
calibration I
ran printed just fine but now the second print hangs or
goes all the way
through. Sometimes if I cancel the print job and
reboot it will
work but most times the same thing happens. I just
cancelled the
job and tried to print an image and it printed just fine
so I tried to
print the calbration print again and it hangs. However
sometimes images
have the problem too. My 1280 used to do it too. I
can't determine
a pattern to the problem. When I print with Qimage
through the
Epson driver it always prints correctly.
Has this happend
to anybody?
Thanks,
Tom