I have ink limit at 90%, boost at 95%, shadow at 12 & overlap at 16. The paper is Permajet Alpha. The limit is quite high so I'm not sure how much effect black boost is having anyway. I chose the high limit as the dmax was at its greatest (1.72 absolute) on the 90% patch. I'm using x-rite 810 for measurements and I've re-checked them and they are consistent. I'll have a play around with reducing the boost & the overlap as I don't seem to get quite the dmax I did on the calibration strip. Howard John Moody wrote: > The last step has a much higher density increase than all others, > effectively asking the linearization to fix a sharp bend at the end of > the curve. > > Do you have black boost at a fairly high level? If so, you may get > smoother results cutting back on black-boost, and upping the ink limit > to achieve the 1.69 Dmax you are getting. A high shadow value can bend > the curve like that as well, but since it\ufffds only the last step, I\ufffdm > guessing black boost. > > Also, if you scanned the patches with an i1, you might go back and > re-read the last several in patch mode to see that you get consistent > values. I have a hypothesis that the dark patch accuracy degrades with > increasing scan speed, but I have not seen others corroborate that. > > > > Best regards, > > John Moody > > > > -----Original Message----- > *From:* QuadtoneRIP@yahoogroups.com > [mailto:QuadtoneRIP@yahoogroups.com]*On Behalf Of *Howard Shaw > *Sent:* Thursday, October 27, 2005 5:51 PM > *To:* QuadtoneRIP@yahoogroups.com > *Subject:* [QuadtoneRIP] Error message: Invalid linearize curve - not > constantly increasing > > > > I was making a linearisation today with the following values from a > 51-step and got the above error message and the curve was not created: > 0.06 > 0.08 > 0.1 > 0.12 > 0.15 > 0.17 > 0.2 > 0.23 > 0.26 > 0.29 > 0.33 > 0.36 > 0.41 > 0.45 > 0.48 > 0.53 > 0.57 > 0.61 > 0.65 > 0.69 > 0.72 > 0.75 > 0.79 > 0.83 > 0.87 > 0.91 > 0.95 > 0.98 > 1.01 > 1.04 > 1.09 > 1.12 > 1.14 > 1.18 > 1.19 > 1.22 > 1.24 > 1.28 > 1.31 > 1.34 > 1.37 > 1.4 > 1.42 > 1.46 > 1.49 > 1.52 > 1.55 > 1.57 > 1.6 > 1.62 > 1.69 > > All the values are increasing albeit not "constantly". If I change the > penultimate value from 1.62 to 1.63 the curve creation works. Any reason > this should be so? > > Howard > > > > > > > > SPONSORED LINKS > Digital wedding photography > <http://groups.yahoo.com/gads?t=ms&k=Digital+wedding+photography&w1=Digital+wedding+photography&w2=Learn+digital+photography&w3=Digital+photography+college&w4=Digital+photography&w5=Digital+photography+web+site&w6=Digital+photography+course&c=6&s=188&.sig=Umur-3rsLOic7dZMwVL94w> > Learn digital photography > <http://groups.yahoo.com/gads?t=ms&k=Learn+digital+photography&w1=Digital+wedding+photography&w2=Learn+digital+photography&w3=Digital+photography+college&w4=Digital+photography&w5=Digital+photography+web+site&w6=Digital+photography+course&c=6&s=188&.sig=emApqtvj0kHQhppIzRrNgw> > Digital photography college > <http://groups.yahoo.com/gads?t=ms&k=Digital+photography+college&w1=Digital+wedding+photography&w2=Learn+digital+photography&w3=Digital+photography+college&w4=Digital+photography&w5=Digital+photography+web+site&w6=Digital+photography+course&c=6&s=188&.sig=aIiABJLTZsUnmWBs4mZwuA> > > Digital photography > <http://groups.yahoo.com/gads?t=ms&k=Digital+photography&w1=Digital+wedding+photography&w2=Learn+digital+photography&w3=Digital+photography+college&w4=Digital+photography&w5=Digital+photography+web+site&w6=Digital+photography+course&c=6&s=188&.sig=pJmwqgVzec3JGBtWYlPbOg> > Digital photography web site > <http://groups.yahoo.com/gads?t=ms&k=Digital+photography+web+site&w1=Digital+wedding+photography&w2=Learn+digital+photography&w3=Digital+photography+college&w4=Digital+photography&w5=Digital+photography+web+site&w6=Digital+photography+course&c=6&s=188&.sig=BMII8rtDZlAtVdZsPhaZqw> > Digital photography course > <http://groups.yahoo.com/gads?t=ms&k=Digital+photography+course&w1=Digital+wedding+photography&w2=Learn+digital+photography&w3=Digital+photography+college&w4=Digital+photography&w5=Digital+photography+web+site&w6=Digital+photography+course&c=6&s=188&.sig=OrnrutXVhHZu-7E7ccLtuw> > > > > ------------------------------------------------------------------------ > YAHOO! GROUPS LINKS > > * Visit your group "QuadtoneRIP > <http://groups.yahoo.com/group/QuadtoneRIP>" on the web. > > * To unsubscribe from this group, send an email to: > QuadtoneRIP-unsubscribe@yahoogroups.com > <mailto:QuadtoneRIP-unsubscribe@yahoogroups.com?subject=Unsubscribe> > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service <http://docs.yahoo.com/info/terms/>. > > > ------------------------------------------------------------------------ >
Message
Re: [QuadtoneRIP] Error message: Invalid linearize curve - not constantly increasing
2005-10-28 by Howard Shaw
Attachments
- No local attachments were found for this message.