Yes, you should be using the curve creation tool... I am using the word profile interchangeably with curve I guess. If you are using the K3 inkset I would try the curve/profile that Sandy King referenced and see if you have the same issues... There are also tutorials for building your own curves with the K3 inkset on the websites of Ron Reeder and Clay Harmon. Greg >Thanks for the reply. >Is there more than one way to create curves? If so, I don't know of any but using the curve creation tool in QTR >which is how I did mine. I once tried editing a qidf file in a text editor, but that was long ago and the curve I'm >using now was made in the QTR utility. >Using the K3 inkset. >I find no clogged jets when I run the Epson utility. Is there anywhere else I might look? >So... please expand on what an "ink profile" is, where I look to change or adjust it, and what I should look for. >Thanks, >JeffR --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
Message
Re: Another week, another problem. With QTR?
2015-09-11 by Greg Franco