Yahoo Groups archive

QTR-Quadtone RIP

Index last updated: 2026-04-28 23:12 UTC

Message

Re: [QuadtoneRIP] Tone of K and C inks

2015-01-26 by richard@...

Here is an idea of what the MIS EB6 MK and C (shade-2) densities are like when printed on Hahnamuhle PhotoRag out of an Epson 1430. These are readings of the ink separation strips for the two channels printed 0-100. At the 100% patch the densities are actually pretty close to each other and can be hard to tell apart, but the middle of the scale tells a different story.

When I make profiles for the EB6 ink set, the ink limit for K is down in the mid 30s to mid 40s, and maybe up to 50 depending on the paper. I tend to have more overlap and lower ink limits, which are set so the densities at 100% are evenly spaced rather set to as much as the paper will hold. It seems to make a better profile with this printer compared to profiles I've made with the larger, more consistent printers.

MIS EB6-Purchased in November 2014
Shade_1-MK
Density Shade_2-C
Density 0.03 0.03 0.79 0.43 0.97 0.52 1.26 0.76 1.47 0.96 1.57 1.09 1.62 1.19 1.65 1.28 1.67 1.35 1.67 1.40 1.68 1.44 1.68 1.47 1.69 1.49 1.69 1.52 1.69 1.54 1.69 1.55 1.68 1.53 1.68 1.57 1.66 1.58 1.65 1.59 1.63 1.59
Richard Boutwell

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.