Yahoo Groups archive

QTR-Quadtone RIP

Index last updated: 2026-04-28 23:12 UTC

Message

Re: QTR Support for Epson 1430 ?

2013-04-28 by kenleegallery

That worked perfectly !!!

Merci bien !

--- In QuadtoneRIP@yahoogroups.com, Jacques Caron <jacques.caron@...> wrote:
>
> Well
> 
> One thing I know is that renaming is not the best way; remove all the created or renamed printers (in any event you could delete the Epson one and re-install it).
> 
> Then, on the "create a new printer, the name given should be "QUAD1400-MIS" and using the 1430 driver. The, re-installing QTR and running the "Install1400-MIS.command" should work out.
> 
> Good luck
> 
> Le 2013-04-28 à 10:44, kenleegallery <kenlee333@...> a écrit :
> 
> > Using the Print and Fax preferences control, I have tried renaming the
> > existing printer to 1400-MIS and also to QUAD1400.
> > 
> > I have also tried installing a second printer, called 1400-MIS and also
> > QUAD1400
> > 
> > I have also re-installed QTR several times.
> > 
> > In all cases, the script called "Install1400-MIS.command" fails with the
> > following message: "Cannot find an Epson USB printer with the name 1400"
> > 
> > 
> > 
> > --- In QuadtoneRIP@yahoogroups.com, Jacques Caron  wrote:
> >> 
> >> Hi
> >> 
> >> If I remember well, you have to use the "print & Fax" preferences,
> > create a 1400-MIS printer (using a 1430 driver in the choice of driver)
> > then, when it's done, use again the "1400-" install script. I think that
> > I reinstalled all QTR but it was a while ago. I was fighting more with
> > the wi-fi thing than QTR.
> >> 
> >> My 1430 works perfectly with an EB-6 configuration; thanks to Paul and
> > Roy.
> >> 
> >> Le 2013-04-28 à 07:42, kenleegallery kenlee333@ a écrit :
> >> 
> >>> Because the Epson 1400 was unavailable, I just purchased an Epson
> > 1430 (a 1400 with WiFi capability) and note that on my Mac, the script
> > Install1400-K6.command fails.
> >>> 
> >>> The script complains that there is no printer named 1400. If I
> > rename the command to Install1430-k6.command, it also fails, complaining
> > that 1430 is not supported.
> >>> 
> >>> Is there any way to use a 1430 with QTR on the Mac ?
> >>> 
> >>> 
> >>> 
> >>> ------------------------------------
> >>> 
> >>> Yahoo! Groups Links
> >>> 
> >>> 
> >>> 
> >> 
> >> Jacques Caron
> >> Photographe
> >> jacques.caron@
> >> 
> >> 
> >> 
> >> 
> >> 
> >> [Non-text portions of this message have been removed]
> >> 
> > 
> > 
> > 
> > 
> > ------------------------------------
> > 
> > Yahoo! Groups Links
> > 
> > 
> > 
> 
> Jacques Caron
> Photographe
> jacques.caron@...
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.