QTR-Quadtone RIP

Thanks for the replies. I'll do some more reading... and take a look at the profiles. Thanks for piping in Paul... All of the info you have provided on your site, and in the discussions is very much appreciated.

Sean

--- In QuadtoneRIP@yahoogroups.com, Paul Roark <roark.paul@...> wrote:
>
> mccarvill <mccarvill@...> wrote:
> 
> > **
> >
> >
> > Before burning through more ink and paper testing your custom curve, maybe
> > try one of the `canned' Eboni-6 curves by Paul Roark ...
> >
> 
> My Eboni-6 write-up is at  http://www.paulroark.com/BW-Info/Eboni-6.pdf .
> 
> Probably my best QTR workflow explanation, however, is in
> http://www.paulroark.com/BW-Info/Eboni-4-Plus.pdf
> at page 11 and following.  (By the way, profiles that are for Eboni-4 work
> with an Eboni-6 setup, but just use 4 positions.)
> 
> I hope this helps.
> 
> Paul
> www.PaulRoark.com
> 
> 
> [Non-text portions of this message have been removed]
>