Yahoo Groups archive

QTR-Quadtone RIP

Index last updated: 2026-04-28 23:12 UTC

Message

RE: [QuadtoneRIP] Re: Photos never dry after printing through QuadtoneRIP

2012-02-03 by Cheryl Stephenson

Greg,

You may be on to something but since I am so new to QTR I need additional
help.  Here is my setup:

 

Media type: Photo paper

 

Curve setup:  

Curve 1: UC_EEnhMatte-cool  (85%)

Curve 2: UC_EEnhMatte-sepia  (15%)

Curve 3: none

The only curve choices are "matte" type, there is no photo or glossy choice.
Maybe this is where my problem is???

 

Resolution: 1440x1440 super

Speed: uni-directional

I haven't used the Advanced Adjustments at all.

 

Any additional hints are most welcome!

Regards,

Cheryl

  

 

-----Original Message-----
From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On
Behalf Of gmikol
Sent: Friday, February 03, 2012 10:04 AM
To: QuadtoneRIP@yahoogroups.com
Subject: [QuadtoneRIP] Re: Photos never dry after printing through
QuadtoneRIP

 

  


Also, make sure that your QTR profile is using the photo black ink (PK) when
using a glossy photo paper. I've found that matte black (MK) does create a
very delicate image on glossy and lustre type photo papers, and quite prone
to rubbing off.

--Greg

--- In QuadtoneRIP@yahoogroups.com <mailto:QuadtoneRIP%40yahoogroups.com> ,
Mike Finley <mike.finley@...> wrote:
>
> Its not normal
> The usual cause of inks not drying (whatever software you use) is 
> printing on the wrong side of the paper (or using an inappropriate paper 
> for the ink and loading far too much ink onto the paper, but that 
> doesn't sound likely if you're happy with the image apart from it not 
> drying)
> 
> On 02/02/2012 17:09, CherylS wrote:
> >
> > Help! I have an Epson R1800 and am on a PC with XP Pro. I just 
> > purchased QuadtoneRIP so am new to this game. I print on Epson Premium 
> > glossy paper, and am very satisfied with the B&W photos coming out of 
> > QTR, but these photos never seem to dry. They are easily damaged, 
> > scratched or smeared. Is this normal? Should I be using different 
> > paper? I was estatic to get the color I want but the fragility of the 
> > prints is scary. Is anyone else having this issue? thanks!
> >
> >
> >
> > 
> 
> -- 
> mike finley photography
> http://www.mikefinley.co.uk
> http://words.mikefinley.co.uk
> 
> 
> 
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.