--- In PLAN_B_analog_blog@yahoogroups.com, "Pierre Zeeman" <pierrezee@...> wrote:
>
> Peter,
>
> - will the milton grande + 21a expander be 84 hp wide?
Dont know yet - I haven't design the expander mechanically yet
> - will it be possible to run it as 2x16, as well as 4x8?
4x8 - it can do without the expander.
2X16 - With the upcoming touchplates, yes. With s deopfer or Analog Systems sequential
switch, yes.
But you'll also be able to stack multiple MIltons from end to end. Imagine having four
Venti's and getting four banks of 64 steps - resettable at any time, all working off the
controls of the first Milton in the line. You'll be able to do this with the new MIltons out of
the box- no expander required.
> - does the touchplate mean that it is not quite 3u high?
No. The touchplate will be a stand alone unit. The Miltons will remain 3ru high. I need to
ask that you wait until we're ready to show the control surface before I go into further
details on this.
> - any possibility of adding a feedback loop out to your delay module?
It's got manual and VC Regen. As far as an external feedback loop, maybe. Sorry for not
posting this info yet. There aresome changes being tested and I need to wait to see if
they're a go.
> - you waxed eloquent about balanced modulators on the doepfer list some time
> ago, care to wax a little more on your approach to the RM in the model 25?
The M25 RM uses two halfs of the SSM2164 it's four quadrant multiplier. Low leakage,
good cancellation - l can be clean when you want it, and ugly as crap when you don't.
> - model 16: size?
The model 16 is 26 HP wide. It may go to 27, but right now, no
>
> whew, that's quite a lot of questions. t.i.a. for whichever you feel like
> answering
>
Thanks for your interest. Any time, that's what Tim's here for (ha ha).
Show quoted textHide quoted text
> rgds
>
> Pierre
>
> _________________________________________________________________
> Discover the magic of RSS feeds at MSN South Africa! http://za.msn.com/
>