Yahoo Groups archive

PLAN B analog blog

Index last updated: 2026-04-28 23:10 UTC

Thread

ELF Series Current Draw

ELF Series Current Draw

2008-09-14 by dingfutzer

Was unable to locate mA current draw for PB 37 & PB 38 - Peter do you
have these specifications? Great job on these modules!

Re: ELF Series Current Draw

2008-09-15 by (i think you can figure that out)

For future reference, all of the current draw info on all of the ELFS,
including the 37 and 38, are printed on the bottom each product's
info page in the graphic which also shows the HPO width.

the graphic looks like this:

http://www.ear-group.net/elfstats.jpg


None of the ELFS pull more than 20mA.

- P

 --- In PLAN_B_analog_blog@yahoogroups.com, "dingfutzer" <eyesaw@...>
wrote:
Show quoted textHide quoted text
>
> Was unable to locate mA current draw for PB 37 & PB 38 - Peter do you
> have these specifications? Great job on these modules!
>

Re: [PLAN_B_analog_blog] Re: ELF Series Current Draw

2008-09-16 by Eyesaw

Thanks Peter,
Bill
----- Original Message -----
Sent: Monday, September 15, 2008 12:57 PM
Subject: [PLAN_B_analog_blog] Re: ELF Series Current Draw

For future reference, all of the current draw info on all of the ELFS,
including the 37 and 38, are printed on the bottom each product's
info page in the graphic which also shows the HPO width.

the graphic looks like this:

http://www.ear-group.net/elfstats.jpg

None of the ELFS pull more than 20mA.

- P

--- In PLAN_B_analog_blog@yahoogroups.com, "dingfutzer"
wrote:
>
> Was unable to locate mA current draw for PB 37 & PB 38 - Peter do you
> have these specifications? Great job on these modules!
>



avast! Antivirus: Inbound message clean.

Virus Database (VPS): 080914-0, 09/14/2008
Tested on: 9/16/2008 6:59:07 AM
avast! - copyright (c) 1988-2008 ALWIL Software.




avast! Antivirus: Outbound message clean.

Virus Database (VPS): 080914-0, 09/14/2008
Tested on: 9/16/2008 7:00:55 AM
avast! - copyright (c) 1988-2008 ALWIL Software.


Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.