Blacet Miniwave conversion kits in stock at Noisebug Saturday
2008-08-29 by (i think you can figure that out)
The first lot of Blacet miniwave faceplate Eurorack conversion kits will be delivered to Noisebug tomorrow, Friday August 29th.
Thread
Blacet Miniwave conversion kits in stock at Noisebug Saturday
Re: Model 28 select range
2008-08-29 by (i think you can figure that out)
Tony, a couple people now have commented on this. It's a resistor change. Give me a couple of weeks and let me comes up with a solution. --- In PLAN_B_analog_blog@yahoogroups.com, Anthony Rolando <goldenechos@...> wrote: > > > Hello, is there a way to adjust the select range on the M28? I have not measured anything out, but the window to achieve Quarter notes seems to be very small compared to that of the other 2 values. So much thta it is nearly impossible to get quarter notes from the module when using the serial output. > > Tony > > _________________________________________________________________ > Talk to your Yahoo! Friends via Windows Live Messenger. Find out how. > http://www.windowslive.com/explore/messenger?ocid=TXT_TAGLM_WL_messenger_yahoo_082008 >
[PLAN_B_analog_blog] Model 28 select range
2008-08-29 by Anthony Rolando
Hello, is there a way to adjust the select range on the M28? I have not measured anything out, but the window to achieve Quarter notes seems to be very small compared to that of the other 2 values. So much thta it is nearly impossible to get quarter notes from the module when using the serial output.
Tony
Talk to your Yahoo! Friends via Windows Live Messenger. Find Out How
Tony
Talk to your Yahoo! Friends via Windows Live Messenger. Find Out How
Re: [PLAN_B_analog_blog] Blacet Miniwave conversion kits in stock at Noisebug Saturday
2008-08-29 by loopcycle
peter--will you be posting a pic of the panel on the site? --- On Thu, 8/28/08, (i think you can figure that out) <peter@buzzclick-music.com> wrote:
Show quoted textHide quoted text
> From: (i think you can figure that out) <peter@buzzclick-music.com> > Subject: [PLAN_B_analog_blog] Blacet Miniwave conversion kits in stock at Noisebug Saturday > To: PLAN_B_analog_blog@yahoogroups.com > Date: Thursday, August 28, 2008, 11:51 PM > The first lot of Blacet miniwave faceplate Eurorack > conversion kits > will be delivered to Noisebug tomorrow, Friday August 29th. > > > > ------------------------------------ > > Yahoo! Groups Links > > >
Re: [PLAN_B_analog_blog] Re: Model 28 select range
2008-08-29 by Don Kim
The Leveler Elf might help. I've been running the stepped output from the M24 through the leveler and into the M28 to select all 3 kinds of notes. I'm not sure how precise you have to be though. -Don --- On Fri, 8/29/08, (i think you can figure that out) <peter@buzzclick-music.com> wrote:
Show quoted textHide quoted text
From: (i think you can figure that out) <peter@buzzclick-music.com>
Subject: [PLAN_B_analog_blog] Re: Model 28 select range
To: PLAN_B_analog_blog@yahoogroups.com
Date: Friday, August 29, 2008, 12:23 AM
Tony,
a couple people now have commented on this. It's a resistor change.
Give me a couple of weeks and let me comes up with a solution.
--- In PLAN_B_analog_ blog@yahoogroups .com, Anthony Rolando
<goldenechos@ ...> wrote:
>
>
> Hello, is there a way to adjust the select range on the M28? I have
not measured anything out, but the window to achieve Quarter notes
seems to be very small compared to that of the other 2 values. So much
thta it is nearly impossible to get quarter notes from the module when
using the serial output.
>
> Tony
>
> ____________ _________ _________ _________ _________ _________ _
> Talk to your Yahoo! Friends via Windows Live Messenger. Find out how.
>
http://www.windowsl ive.com/explore/ messenger? ocid=TXT_ TAGLM_WL_ messenger_ yahoo_082008
>Re: Blacet Miniwave conversion kits in stock at Noisebug Saturday
2008-08-29 by (i think you can figure that out)
http://bp0.blogger.com/_FMBJEkaC8Lw/SDSnFHjqQrI/AAAAAAAAUCc/SAnren_pACs/s1600-h/euroblacet.jpg
RE: [PLAN_B_analog_blog] Re: Model 28 select range
2008-09-04 by Anthony Rolando
That should not be necessary Don. There is supposed to be a window of 2.5V between each of the 3 selections. It should be easy to get a ll three with nearly any CV source. Tony The Leveler Elf might help. I've been running the stepped output from the M24 through the leveler and into the M28 to select all 3 kinds of notes. I'm not sure how precise you have to be though. -Don --- On Fri, 8/29/08, (i think you can figure that out) wrote:
Show quoted textHide quoted text
From: (i think you can figure that out) Subject: [PLAN_B_analog_blog] Re: Model 28 select range To: PLAN_B_analog_blog@yahoogroups.com Date: Friday, August 29, 2008, 12:23 AM Tony, a couple people now have commented on this. It's a resistor change. Give me a couple of weeks and let me comes up with a solution. --- In PLAN_B_analog_ blog@yahoogroups .com, Anthony Rolando wrote: > > > Hello, is there a way to adjust the select range on the M28? I have not measured anything out, but the window to achieve Quarter notes seems to be very small compared to that of the other 2 values. So much thta it is nearly impossible to get quarter notes from the module when using the serial output. > > Tony > > ____________ _________ _________ _________ _________ _________ _ > Talk to your Yahoo! Friends via Windows Live Messenger. Find out how. > http://www.windowsl ive.com/explore/ messenger? ocid=TXT_ TAGLM_WL_ messenger_ yahoo_082008 > _________________________________________________________________ Stay up to date on your PC, the Web, and your mobile phone with Windows Live. http://clk.atdmt.com/MRT/go/msnnkwxp1020093185mrt/direct/01/