PLAN B analog blog

Okay, I give up!  I can't figure out where to mount my Model 1 in a 
Doepfer G6 enclosure, and I'm not ashamed to admit it.  Well, maybe I 
am, but that's not the point ;)  I have several G6 enclosures, rack 
mounted flush with each other.  The only way I can see of mounting the 
Model 1 would be through the square grid of holes at the top or bottom 
of the G6, but that won't work with several cases stacked together.  
Short of drilling additional holes into the G6, can someone suggest a 
mounting strategy, or ideally post some pictures?  Thanks.

--- In PLAN_B_analog_blog@yahoogroups.com, "deastman2" <deastman2@...>
wrote:
>
> Okay, I give up!  I can't figure out where to mount my Model 1 in a 
> Doepfer G6 enclosure, and I'm not ashamed to admit it.  Well, maybe I 
> am, but that's not the point ;)  I have several G6 enclosures, rack 
> mounted flush with each other.  The only way I can see of mounting the 
> Model 1 would be through the square grid of holes at the top or bottom 
> of the G6, but that won't work with several cases stacked together.  
> Short of drilling additional holes into the G6, can someone suggest a 
> mounting strategy, or ideally post some pictures?  Thanks.
>

Anyone?  Hello?  ECHO...  Echo... echo...

Try hotgluing the base of the standoffs to the base of the case, 
this'll probably hold it and if the location isn't right, you can
remove an place it elsewhere.

- P




--- In PLAN_B_analog_blog@yahoogroups.com, "deastman2" <deastman2@...>
wrote:
>
> --- In PLAN_B_analog_blog@yahoogroups.com, "deastman2" <deastman2@>
> wrote:
> >
> > Okay, I give up!  I can't figure out where to mount my Model 1 in a 
> > Doepfer G6 enclosure, and I'm not ashamed to admit it.  Well, maybe I 
> > am, but that's not the point ;)  I have several G6 enclosures, rack 
> > mounted flush with each other.  The only way I can see of mounting
the 
> > Model 1 would be through the square grid of holes at the top or
bottom 

> > of the G6, but that won't work with several cases stacked together.  
> > Short of drilling additional holes into the G6, can someone suggest a 
> > mounting strategy, or ideally post some pictures?  Thanks.
> >
> 
> Anyone?  Hello?  ECHO...  Echo... echo...
>

Doh!  Why didn't I think of that?  Thanks Peter.

--- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure 
that out)" <peter@...> wrote:

>
> Try hotgluing the base of the standoffs to the base of the case, 
> this'll probably hold it and if the location isn't right, you can
> remove an place it elsewhere.
>