PLAN B analog blog

PG:  Can do as soon as the faceplates arrive.  They are running about a two week cycle, and were submitted late last week.  In the meantime, I've uploaded the faceplate art (a sorry substitute, I know!).  Go to the files section and click on 15A Faceplate Art.

Hi Peter,
it sounds very interesting, can we please have a picture of the expander 
15a?
Thanks for your efforts
Axel

(i think you can figure that out) schrieb:
>
> The Plan B Model 15 Rev.2 will begin shipping on May 6, 2007. The 
> circuit is identical to
> previous releases with the addition of a new connector to support the 
> 15A Expander. This is
> the only circuit change. To facilitate this the PCB had to be 
> redesigned and while we were at it
> we reconfigured that assembly to mount parallel to the faceplate, 
> taking the overall depth of
> the module from 4.25 inches to just over 1 inch thick. Go to the EAR 
> Homepage or M15
> product page for a photo.
>
> The new 15A Expander adds functionality to the M15 and a direct result 
> of customer
> requests. It connects to the Rev.2 VCO via a dedicated I/O connector 
> located on the back of
> the PCB. It can however be retrofitted to any Model 15's regardless of 
> revision, although
> earlier releases (rev 1 - 1.6) will require point-to point 
> connections. the 15A is only 4 HP
> wide and adds a PWM attenuation pot, a Soft/Hard Sync crossfade pot 
> (which amplifies the
> M15 sync function up to x4 it's previous intensity), 3 three way 
> transposition switch
> (configured octave up/none/octave down) and two additional 1V/oct VC 
> inputs. The 15A will
> begin shipping at the end of May 2007 with a retail price of $70.
>
> May is a busy month for us. Along with these two product additions, 
> look for the new the
> M28 and 28A to be released sometime before June 1.
>
>