PLAN B analog blog

BIg applause to Ross and ROmoeo for getting it - The Model 21 is slated to have a 
complementry touch keyboard sometime after it's release.  There will only be one type 
produced - geared toward 16 keys, so it's best suited for the Venti.

The thoughplate will be a single rack width high unit which will come in two flavors - with 
or without rack ears.  On it will be 16 touchplates, an internal connection to the Venti's VC 
direction input, a duplicate external direction input so one does not lose that functionality, 
pressure out, linear voltage out (sixteen equal divisions of ground to 8 volts - so a 1/2 
volt increment per key) and gate out.  If there's rtoom, this is wherethe veertical 
sequencing will also be housed.

OK< so what ever happened to symmetrry?  

If you happen to use two rows of rack mounted EUro and don't want the MIUlton touchkeys 
wo send one rack and inch anf three quarters wack form the other, simultanious to it's 
release will be a one rack unit high multiple gang - all the mults you could ever dream of.  
By using both, then your adcecent cabinets will; linw up as they should.

when is this all going to happen?

this year.

We've got five modules to release in short time: The M's 16, 25, 26, 27 and Miltons.  Once 
that occurs, the touchplates are next in the development pipe, along with the release and 
completion of the M18 and M23 ASR.

Sorry for the delay on these things.  Only two guys here, orders to fill, disrupting daily 
group Starbucks runs to make (my fault), not to mention Tim's periodic defibulation 
requirements due to his Monster and Rockstart cold beverage usage.

...Just kidding about Tim.  That's not fair.  (He usually doesn't require the pads).

toodles -

- P