PLAN B analog blog

Tried a 50k and did not hear much difference. Maybe I am wired goofy -
what are the proper connections from jacks to pot terminals? Should this
be a linear pot and does the taper matter?

Thanks for assisting the circuitry challenged amongst us - Bill


--- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure that
out)" <peter@...> wrote:
>
> A passive attenuator is of course non-powered so the value of the pot
> is much less important. Basically anything between 10K to 100K is what
> you want. The higher the value, the less current is used.
>
> hope this helps,
>
> - P
>
>
> --- In PLAN_B_analog_blog@yahoogroups.com, "dingfutzer" eyesaw@
> wrote:
> >
> >
> > Peter:
> >
> > What would the correct spec be for a passive cv attenuation pot
> > for the LPG's? I plan on building my own 4x atten. module -
> >
> > Thanks, Bill
> >
>