Marcos Maniacs

> Hello;Fellows.
> I am in search of the lower radiator hose for my 71 Marcos with a 
> Volvo 3L.I contacted Rory in the U.K. and he told me that this part 
> is not available and that I should go rummage around at the local 
> auto parts house for something that might fit .I have talked to the 
> local Volvo people and they told me much the same thing,so I was 
> hoping that one you have hit this same wall and could give me some 
> advice etc.Other wise my options are to get lucky at PartsRus,do some 
> sort of a splice job,use a flex hose or some kind of combination of 
> all of the above.
> Any help here will be greatly appreciated!
> Mark and his rotten will not last for long hose are waiting your help.

> -----Original Message-----
> From:	Mike Denman [SMTP:marcos18001966@...]
> Sent:	Thursday, September 06, 2001 8:29 PM
> To:	MarcosManiacs@yahoogroups.com
> Subject:	[MarcosManiacs] Re: Volvo 3 liter lower ratiator hose
> 
> Hi Mark,
> I'm not sure if the 6 cylinder Volvo used the same hose as the 4
> cylinder Volvo but I found a hose at Pep Boys.  I took my old hose
> with me (which was made of two pieces with a piece of metal tubing in
> the center, (an  attempt by the previous owner to make a hose) and
> found a suitable one piece replacement in a couple of minutes.  I
> asked the clerk if I could go through their hoses since my car wasn't
> listed and he agreed.  It was so easy I didn't bother writting down
> the part #.  The new hose fits better than the old hose and it isn't
> rotten.
> Mike Denman
> 1966 Marcos 1800
> Chassis # 4079
> 
> -- In MarcosManiacs@y..., markwoof92@a... wrote:
> > Hello;Fellows.
> > I am in search of the lower radiator hose for my 71 Marcos with a 
> > Volvo 3L.I contacted Rory in the U.K. and he told me that this part 
> > is not available and that I should go rummage around at the local 
> > auto parts house for something that might fit .I have talked to the 
> > local Volvo people and they told me much the same thing,so I was 
> > hoping that one you have hit this same wall and could give me some 
> > advice etc.Other wise my options are to get lucky at PartsRus,do some 
> > sort of a splice job,use a flex hose or some kind of combination of 
> > all of the above.
> > Any help here will be greatly appreciated!
> > Mark and his rotten will not last for long hose are waiting your help.
> 
> 
> 
> To unsubscribe from this group, send an email to:
> MarcosManiacs-unsubscribe@yahoogroups.com
> 
>  
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
>