Marcos Maniacs

Hi Don.
When I replaced my bushings I eventually hade to cut the bolts with a dye 
grinder and a high speed cutoff wheel ,this requires an air comprerser, some 
good eye protection and a steady hand.I had to cut the bolts inside the 
brackets  If memory serves me  the spindles, hubs and just about everthing 
was removed for access and the car was up off the ground a good bit .as for a 
Sawsall goes I have my douts but give it a try but be careful.if you have any 
questions please call me on the phone and I will be happy to help . I  am not 
bragging but removing nasty fasteners is part of what I do for a living .
Yours Mark PN 469 5332
 GO MARCOS