Marcos Maniacs

Hampton,
     Do what I did and go for braided stainless lines. You will need 
adaptors at each end but they are much more reliable and look great. E mail 
me if you can't find a supplier. The make is Aeroquip and your local 
hydraulics supply shop should have what you need.

Garry

PS take in the old hose and they will give you the correct fittings and make 
it to length.


>From: "Don Lattimer" <donlattimer@...>
>Reply-To: MarcosManiacs@yahoogroups.com
>To: <MarcosManiacs@yahoogroups.com>
>Subject: Re: [MarcosManiacs] Rear brake hose
>Date: Thu, 4 May 2006 08:47:29 -0700
>
>Hampton,
>
>Don't know if any other car's will fit.  I ordered a set of stainless lines 
>from Marcos Heritage Spares but it wasn't cheap (shipping $ hurts).  You 
>can have them made up locallly for less.  The improvement on mine was 
>substantial!
>
>Don
>#3M5759
>   ----- Original Message -----
>   From: Hampton Peterson
>   To: MarcosManiacs@yahoogroups.com
>   Sent: Wednesday, May 03, 2006 4:51 PM
>   Subject: [MarcosManiacs] Rear brake hose
>
>
>   Hi all,
>   does anyone know what other car the rear brake hose on a 1970 3 Litre
>   fits?  I'm trying to cross reference to get a new one.  It is a little
>   over 13" long (which is longer than the front GT6 type so I can't use
>   one of those).
>   Thanks in advance,
>   Hampton
>   #3M5463
>
>
>
>
>
>   SPONSORED LINKS Marcos  North america  Automotive maintenance
>         Automotive radiators  New chevy
>
>
>------------------------------------------------------------------------------
>   YAHOO! GROUPS LINKS
>
>     a..  Visit your group "MarcosManiacs" on the web.
>
>     b..  To unsubscribe from this group, send an email to:
>      MarcosManiacs-unsubscribe@yahoogroups.com
>
>     c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
>Service.
>
>
>------------------------------------------------------------------------------
>