Hi Don,
Thanks for the feedback. I'd be very grateful if you sent me the prints for
the design. My current setup works OK but it isn't anything to write home
about.
Regards,
Paul
-----Original Message-----
From: Don Lattimer <donlattimer@...>
[mailto:donlattimer@...]
Sent: January 27, 2003 1:56 PM
To: MarcosManiacs@yahoogroups.com
Subject: [MarcosManiacs] Re: Don Lattimer, Bonnet hinge.
Paul,
That is Jack's fully adjustable setup that he designed and built.
He sent me the prints for it a while ago. I can email them to you
if you'd like.
The "spigot" (concentric?)is attached to the 4 inch mounts you
mention. You really have to see the pics to grasp it.
Makes it adjustable up/down, front/back, and all points in-between.
It is also in a back issue of the CMI or MOC mags. I'll check
tonight when I get home.
Don Lattimer
#3m5759
Willits, CA
--- In MarcosManiacs@yahoogroups.com, pauldransfield@i... wrote:
> Hey Jack,
>
> The bonnet hinge spigot in your photo is quite different from the
> arrangement on the earlier cars. Mine is a '72 with similar
chassis members
> but the bonnet rotates on a pair of cylinders approximately 4" in
diameter
> and 1 1/2" wide which are bolted in place of the spigot shown in
your photo.
> The bonnet has a pair plywood support pieces with 4" holes that
allow the
> bonnet to rotate around the cylinders.
>
> Regards,
>
> Paul Dransfield
> 3 litre Volvo
>
> -----Original Message-----
> From: Jack Myers [mailto:jacob@m...]
> Sent: January 24, 2003 3:28 PM
> To: MarcosManiacs@yahoogroups.com
> Subject: [MarcosManiacs] Don Lattimer, Bonnet hinge.
>
>
> Hello Don
> I was looking at some photo's when I came across this one of the
bonnet
> hinge spigot.
> I hope it is of some help.(you should be able to blow it up to get
a really
> good look).
> Regards Jac.
>
> Yahoo! Groups Sponsor
>
> ADVERTISEMENT
>
>
<http://rd.yahoo.com/M=241773.2861420.4212388.2848452/D=egroupweb/S=1
7074905
>
52:HM/A=1394046/R=0/*http://www.hgtv.com/hgtv/pac_ctnt/text/0,,HGTV_3
936_580
> 2,FF.html> HGTV Dream Home Giveaway
>
> <http://us.adserver.yahoo.com/l?
M=241773.2861420.4212388.2848452/D=egroupmai
> l/S=:HM/A=1394046/rand=525204696>
>
> To unsubscribe from this group, send an email to:
> MarcosManiacs-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
To unsubscribe from this group, send an email to:
MarcosManiacs-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/Message
RE: [MarcosManiacs] Re: Don Lattimer, Bonnet hinge.
2003-01-27 by pauldransfield@iname.com
Attachments
- No local attachments were found for this message.