Homebrew_PCBs

----- Original Message -----
From: "dberndt2004" <temp@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Wednesday, March 30, 2005 6:57 AM
Subject: [Homebrew_PCBs] Looking for someone to create 5 board for me.


>
>
>
> Before I begin, I would like to apologize if this type of request is
> unwelcome on this group. I searched for a faq to read the
> rules/guidelines but didnt find it.
>
> I'm looking for someone to create 5 or 6 identical board for me.
> Single
> sided, I guess they are something like 4x3 but you can have a look
> for
> yourself here: http://www.fromorbit.com/projects/picstep/ All the
> source files are there for your perusal if anyone is interested.
> Toner
> transfer or just about anything else is acceptable as long as the end
> result functions.
>
> I'd consider doing this myself but I dont really want to invest in
> the
> equipment for something I might only ever use once.
>
> My other condition, you must be in North America, preferably Canada
> so
> I the boards dont get delayed and dinged with a ridiculous duty and
> brokerage fee.

Getting those boards made professionally won't be expensive, and you'll get
them in a few days. Try Olimex in Bulgaria: http://www.olimex.com, I use
them a lot.

You shouldn't have to pay any duty as the value will be quite low.

Leon

--- In Homebrew_PCBs@yahoogroups.com, "dberndt2004" <temp@u...> wrote:
>
>
> Before I begin, I would like to apologize if this type of request
is
> unwelcome on this group. I searched for a faq to read the
> rules/guidelines but didnt find it.
>
> I'm looking for someone to create 5 or 6 identical board for me.
> Single
> sided, I guess they are something like 4x3 but you can have a look
> for
> yourself here: http://www.fromorbit.com/projects/picstep/ All the
> source files are there for your perusal if anyone is interested.
> Toner
> transfer or just about anything else is acceptable as long as the
end
> result functions.
>
> I'd consider doing this myself but I dont really want to invest in
> the
> equipment for something I might only ever use once.
>
> My other condition, you must be in North America, preferably Canada
> so
> I the boards dont get delayed and dinged with a ridiculous duty and
> brokerage fee.

--- In Homebrew_PCBs@yahoogroups.com, "Gary" <chemelec@h...> wrote:
>
> I could Print those Boards for you (B.C.Canada) if it was in a Good
> PCB Image, so I could print it directly onto mylar.
>
> But it has the overlays for IC and Jumpers on it.
>
> My Site: http://www3.telus.net/chemelec
>
> Take care.......Gary
>
> --- In Homebrew_PCBs@yahoogroups.com, "dberndt2004" <temp@u...>
wrote:
> >
> >
> > Before I begin, I would like to apologize if this type of request
> is
> > unwelcome on this group. I searched for a faq to read the
> > rules/guidelines but didnt find it.
> >
> > I'm looking for someone to create 5 or 6 identical board for me.
> > Single
> > sided, I guess they are something like 4x3 but you can have a look
> > for
> > yourself here: http://www.fromorbit.com/projects/picstep/ All
the
> > source files are there for your perusal if anyone is interested.
> > Toner
> > transfer or just about anything else is acceptable as long as the
> end
> > result functions.
> >
> > I'd consider doing this myself but I dont really want to invest in
> > the
> > equipment for something I might only ever use once.
> >
> > My other condition, you must be in North America, preferably
Canada
> > so
> > I the boards dont get delayed and dinged with a ridiculous duty
and
> > brokerage fee.