Homebrew PCBs

pls ignore

TEST

KD5WWI

[Non-text portions of this message have been removed]

Feeling a bit testy today?

On 6/6/2011 16:59, Derward Myrick wrote:
>
> TEST
>
> KD5WWI
>
> [
>



[Non-text portions of this message have been removed]

My comm line was cut by a construction crew and it took over a week
to get it back up.  By then all my emails were bouncing and most groups
droped me.  I was just testing to see if it was working. 


Derward myrick  KD5WWI

  ----- Original Message ----- 
  From: Tim Hills 
  To: Homebrew_PCBs@yahoogroups.com 
  Sent: Tuesday, June 07, 2011 9:04 AM
  Subject: Re: [Homebrew_PCBs] test


    
  Feeling a bit testy today?

  On 6/6/2011 16:59, Derward Myrick wrote:
  >
  > TEST
  >
  > KD5WWI
  >
  > [
  >

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]

I'M feeling a bit testy today! I have been working on an underwater ROV,
actually 2 Mini0-ROVs, and I can't get all 12 software generated PWM
channels to come out of the ATMega644P I am using. Fortunately, I swallowed
my pride and posted on AVRFreaks, and someone has already pointed out that
the JTAG function ties up 4 pins, and not the same 4 pins used by the ISP.
So that caught me by surprise, and after clearing the JTAG enable fuse bit,
3 of the 4 pins now function. But I still have 3 pins not responding to
commands, and not only have I been running lots of tests to try and figure
out why, but the frustration has made me *feel* very 'testy', too.


    Sounds like Derward has a perfect reason for his feeling testy.

Mike





> Feeling a bit testy today?
>
> On 6/6/2011 16:59, Derward Myrick wrote:
> >
> > TEST
> >
> > KD5WWI
> >
> > [
> >
>
>
> --
Burn the Land,  Boil the Sea,  You can't take the SKY from me!


[Non-text portions of this message have been removed]