Homebrew PCBs

>
> Message: 1
>    Date: Thu, 23 Sep 2004 13:10:24 -0000
>    From: "upand_at_them" <upand_at_them@...>
> Subject: Making the simplest board
>
> Hi guys,
>
> Are there any tips to getting the simplest board with Eagle (free
> version)?  I have a circuit that is fairly simple, very few
> components, but the autorouter in Eagle created something not as
> simple as I had hoped.
>
  This shows two things:
  1. probably is your first PCB
  2. no one told you that autorouter can't be used in any circumstances

There are a few simple rules:
- optimise manually the component placement on the board, this will save
for you time and money
- route manually the GND, this will save you about troubles concerning
the noise
- autoroute, then see what bulshit eagle created for you, unroute
and optimize then with your brain already wrong routed wires

best
Vasile

http://surducan.netfirms.com