Yahoo Groups archive

Homebrew_PCBs

Archive for Homebrew_PCBs.

Index last updated: 2026-03-30 01:05 UTC

Thread

Using a Lexmark E360 vs a E260 for DLP

Using a Lexmark E360 vs a E260 for DLP

2015-06-17 by tflynn6693@...

All

 

Is there anyone in the group that has experience doing Mark Lerman's mod on a Lexmark E360dn printer?....

 

The only difference I can find is a 2 row LCD display on the front panel...

 

If so, did you have to do anything different?  Was the MCU software changed in anyway... was the quality of the print equal to the E260?

 

The E260 are getting scarce and there are a few E360's in town...

 

Thanks all

 

Tom

 

 

Re: [Homebrew_PCBs] Using a Lexmark E360 vs a E260 for DLP

2015-06-17 by Mark Lerman


Here's how an E360 was converted for DLP. Unfortunately it's in French, but you should be able to translate it.
< http://www.lacavedetryphon.fr/2015/03/utiliser-une-imprimante-laser-lexmark.html
>

 If you run down the list of comments in my Instructable < http://www.instructables.com/id/Modification-of-the-Lexmark-E260-for-Direct-Laser--1/
> you will see where the author of the French article made a few
comments (in English) and offered to help anyone needing translation help. Best I can do for you.

Mark

At 03:32 PM 6/17/2015, you wrote:


All

 

Is there anyone in the group that has experience doing Mark Lerman's mod on a Lexmark E360dn printer?....

 

The only difference I can find is a 2 row LCD display on the front panel...

 

If so, did you have to do anything different?  Was the MCU software changed in anyway... was the quality of the print equal to the E260?

 

The E260 are getting scarce and there are a few E360's in town...

 

Thanks all

 

Tom

 

 


Re: [Homebrew_PCBs] Using a Lexmark E360 vs a E260 for DLP

2015-06-17 by Mark Lerman


Google Translate works perfectly for this.


Here's how an E360 was converted for DLP. Unfortunately it's in French, but you should be able to translate it.
< http://www.lacavedetryphon.fr/2015/03/utiliser-une-imprimante-laser-lexmark.html
>

 If you run down the list of comments in my Instructable < http://www.instructables.com/id/Modification-of-the-Lexmark-E260-for-Direct-Laser--1/
> you will see where the author of the French article made a few
comments (in English) and offered to help anyone needing translation help. Best I can do for you.

Mark

At 03:32 PM 6/17/2015, you wrote:


All

 

Is there anyone in the group that has experience doing Mark Lerman's mod on a Lexmark E360dn printer?....

 

The only difference I can find is a 2 row LCD display on the front panel...

 

If so, did you have to do anything different?  Was the MCU software changed in anyway... was the quality of the print equal to the E260?

 

The E260 are getting scarce and there are a few E360's in town...

 

Thanks all

 

Tom

 

 


Re: [Homebrew_PCBs] Using a Lexmark E360 vs a E260 for DLP

2015-06-17 by tflynn6693@...

Goggle Translate works fine.... It seems the hole position on the carrier and a software tweak which  Tryphon Libidouille wrote is all that is different.....     

 

I will give it a try... Thanks Mark and Tryphon...

Re: [Homebrew_PCBs] Using a Lexmark E360 vs a E260 for DLP

2015-06-19 by Mark

Separate switch is fine, and easier.

-----Original Message-----
From: "tflynn6693@... [Homebrew_PCBs]"
Sent: Jun 19, 2015 5:46 PM
To: Homebrew_PCBs@yahoogroups.com
Subject: Re: [Homebrew_PCBs] Using a Lexmark E360 vs a E260 for DLP



Mark do I need to use the "X" button on the front of the printer or can I use a separate button to start the printing process?

 

Thanks

 

Tom