Yahoo Groups archive

Homebrew_PCBs

Archive for Homebrew_PCBs.

Index last updated: 2026-03-30 01:05 UTC

Thread

Lexmark E260 Question

2014-09-03 by randee01@...

I was impressed by the file from mark_from_pomona regarding direct laser printing using a Lexmark E260 from Ebay. Several models of the E260 are available such as E260d, E260dn, E260dt etc. Which printer will work according to the modifications in the file?

Thanks,

Randy

Re: [Homebrew_PCBs] Lexmark E260 Question

2014-09-04 by Mark Lerman

The "d" is for duplex (prints on both sides of paper), "n" for network enabled, not sure what 't' is for. Both the d and dn work fine, as should the n (not sure if the is just a n).

Mark

At 04:51 AM 9/3/2014, you wrote:

I was impressed by the file from mark_from_pomona regarding direct laser printing using a Lexmark E260 from Ebay. Several models of the E260 are available such as E260d, E260dn, E260dt etc. Which printer will work according to the modifications in the file?

Thanks,

Randy