Homebrew_PCBs

On 08/08/13 12:32, ohmware wrote:
>
> I recently came across this YouTube video: "How to equip home made
> PCBs with a professional looking stopping agent (solder resist layer)"
> <http://www.youtube.com/watch?v=VNYIVZgbi9M>.
>
> What is this film that he's using, and where can I get some?
>
> (There is a link in the comments section of the video, but the site it
> points to is in German, and for some reason further comments have been
> disabled.)
>



[Non-text portions of this message have been removed]

On 08/08/13 12:57, Mitch Davis wrote:
>
>
> in English, but I'm also not sure what soldermask he's using:
>
> http://cms.diodenring.de/electronic/mikrocontroller/95-pcb-diy
>



[Non-text portions of this message have been removed]

--- In Homebrew_PCBs@yahoogroups.com, James <bitsyboffin@...> wrote:
>
> Solder mask type of dry film as opposed to etch resist dry film (which
> is thinner and not really suitable for solder mask) is generally called
> Dynamask, it's green (in all I have seen) as opposed to the blue of etch
> resist dry film.
>
> Search ebay for dynamask there is a seller in the Netherlands. Not very
> cheap stuff though.
>
>
>
>
> On 08/08/13 12:32, ohmware wrote:
> >
> > I recently came across this YouTube video: "How to equip home made
> > PCBs with a professional looking stopping agent (solder resist layer)"
> > <http://www.youtube.com/watch?v=VNYIVZgbi9M>.
> >
> > What is this film that he's using, and where can I get some?
> >
> > (There is a link in the comments section of the video, but the site it
> > points to is in German, and for some reason further comments have been
> > disabled.)
> >
>
>
>
> [Non-text portions of this message have been removed]
>

--- In Homebrew_PCBs@yahoogroups.com, "ve7su" <ve7su@...> wrote:
>
> Here is a source on ebay from San Diego. I have ordered and received this item. Works as advertised...
> http://www.ebay.com/itm/Dry-Film-Solder-Mask-Roll-of-12-in-x-42-5-in-bigger-lenght-by-request-/151030774266?ssPageName=ADME:L:OC:CA:3160
>
> Jim
> VE7SU
>
> --- In Homebrew_PCBs@yahoogroups.com, James <bitsyboffin@> wrote:
> >
> > Solder mask type of dry film as opposed to etch resist dry film (which
> > is thinner and not really suitable for solder mask) is generally called
> > Dynamask, it's green (in all I have seen) as opposed to the blue of etch
> > resist dry film.
> >
> > Search ebay for dynamask there is a seller in the Netherlands. Not very
> > cheap stuff though.
> >
> >
> >
> >
> > On 08/08/13 12:32, ohmware wrote:
> > >
> > > I recently came across this YouTube video: "How to equip home made
> > > PCBs with a professional looking stopping agent (solder resist layer)"
> > > <http://www.youtube.com/watch?v=VNYIVZgbi9M>.
> > >
> > > What is this film that he's using, and where can I get some?
> > >
> > > (There is a link in the comments section of the video, but the site it
> > > points to is in German, and for some reason further comments have been
> > > disabled.)
> > >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>

On Thu, Aug 8, 2013 at 10:00 AM, ohmware <kaelin@...> wrote:

> **
>
>
> Thanks, I have an order in now too! I'm looking forward to trying this
> stuff out.
>
>
> --- In Homebrew_PCBs@yahoogroups.com, "ve7su" <ve7su@...> wrote:
> >
> > Here is a source on ebay from San Diego. I have ordered and received
> this item. Works as advertised...
> >
> http://www.ebay.com/itm/Dry-Film-Solder-Mask-Roll-of-12-in-x-42-5-in-bigger-lenght-by-request-/151030774266?ssPageName=ADME:L:OC:CA:3160
> >
> > Jim
> > VE7SU
> >
> > --- In Homebrew_PCBs@yahoogroups.com, James <bitsyboffin@> wrote:
> > >
> > > Solder mask type of dry film as opposed to etch resist dry film (which
> > > is thinner and not really suitable for solder mask) is generally
> called
> > > Dynamask, it's green (in all I have seen) as opposed to the blue of
> etch
> > > resist dry film.
> > >
> > > Search ebay for dynamask there is a seller in the Netherlands. Not
> very
> > > cheap stuff though.
> > >
> > >
> > >
> > >
> > > On 08/08/13 12:32, ohmware wrote:
> > > >
> > > > I recently came across this YouTube video: "How to equip home made
> > > > PCBs with a professional looking stopping agent (solder resist
> layer)"
> > > > <http://www.youtube.com/watch?v=VNYIVZgbi9M>.
> > > >
> > > > What is this film that he's using, and where can I get some?
> > > >
> > > > (There is a link in the comments section of the video, but the site
> it
> > > > points to is in German, and for some reason further comments have
> been
> > > > disabled.)
> > > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
>
>
>


[Non-text portions of this message have been removed]

>
> My intent wasn't to discourage you. All photosensitive dry films have a shelf
> life approx. 6 months at the room temperature. The best thing to do is
> complete your PCB design first, etch, drill and then order the dry film
> soldermask. ;)