Homebrew_PCBs

hi guys,

i've finally ticking my clock over the rotating board :D

http://www.youtube.com/watch?v=yN8QpD5Ycjs

pcb is FR4 double sided with size 6.5" x 2 inches, no solder mask, no
plat through hole, just solder thin wire across the hole on both side. i
don't know, maybe it still to heavy. but it work anyway. i was using dry
film photoresist (dry film) method for making the pcb.

most of components are smd 1206, atmega16 TQFP.

so guys, thanks for your helps, so far :)

regards

hari


PT.CITRA SARI MAKMUR
SATELLITE & TERRESTRIAL NETWORK

Connecting the distance - anytime, anywhere, any content
http://www.csmcom.com

nice


________________________________
From: Hari Hendaryanto <hari.h@...>
To: Homebrew_PCBs@yahoogroups.com
Sent: Sunday, June 9, 2013 5:34 PM
Subject: [Homebrew_PCBs] OOT: propeller clock board




hi guys,

i've finally ticking my clock over the rotating board :D

http://www.youtube.com/watch?v=yN8QpD5Ycjs

pcb is FR4 double sided with size 6.5" x 2 inches, no solder mask, no
plat through hole, just solder thin wire across the hole on both side. i
don't know, maybe it still to heavy. but it work anyway. i was using dry
film photoresist (dry film) method for making the pcb.

most of components are smd 1206, atmega16 TQFP.

so guys, thanks for your helps, so far :)

regards

hari

PT.CITRA SARI MAKMUR
SATELLITE & TERRESTRIAL NETWORK

Connecting the distance - anytime, anywhere, any content
http://www.csmcom.com




[Non-text portions of this message have been removed]