Homebrew PCBs

I have not set up to etch boards, but I need a couple done.  Two small
identical boards, 2 sided.
I don't think they are to complicated.

If someone would like to give making one a shot, I'd be glad to forward the
link to the artwork.
It is currently available for some 'free' proprietary board house software.
I need 3 boards, and
this house has a minimum order that would produce 6 for $51 ... That is out
of my budget for now.

IHS ... Jack


[Non-text portions of this message have been removed]

Jack Coats wrote:

> If someone would like to give making one a shot, I'd be glad to forward the
> link to the artwork.

Which country do you live in, ... state, size of the boards,
single/double, etc ?? Give us a little more information so that we can
help you

bye
as

Sorry for the lack of information.  I am near Nashville Tennessee 37015.
Small boards, I don't have it in front of me, but about 2.5" wide and 3.8"
long
has two boards laid out on it.

I have the layout in ExpressPCB's pcb file format, set up for their
'mini-board' service.
It would cost me about $60 to get 3 boards delivered from them.  But there
are two
boards on each of these so it would give m 6 project boards, and I need 2.

thanks ... Jack at coats dot org is my home email


On Wed, May 13, 2009 at 12:21 PM, Alessio Sangalli <alesan@...>wrote:

> Jack Coats wrote:
>
> > If someone would like to give making one a shot, I'd be glad to forward
> the
> > link to the artwork.
>
> Which country do you live in, ... state, size of the boards,
> single/double, etc ?? Give us a little more information so that we can
> help you
>
> bye
> as
>
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>


[Non-text portions of this message have been removed]

I think I could do those for you (for free of course)

Is it single or double face? Can you at least drill the holes by
yourself? Or is it SMD? Can you provide a PDF document of the artwork?
You should print it out yourself with the "paging scaling 'none'" and
make sure it has the correct size.

bye
as


Jack Coats wrote:

> Sorry for the lack of information.  I am near Nashville Tennessee 37015.
> Small boards, I don't have it in front of me, but about 2.5" wide and 3.8"
> long
> has two boards laid out on it.
> 
> I have the layout in ExpressPCB's pcb file format, set up for their
> 'mini-board' service.
> It would cost me about $60 to get 3 boards delivered from them.  But there
> are two
> boards on each of these so it would give m 6 project boards, and I need 2.
> 
> thanks ... Jack at coats dot org is my home email
> 
> 
> On Wed, May 13, 2009 at 12:21 PM, Alessio Sangalli <alesan@...>wrote:
> 
>> Jack Coats wrote:
>>
>>> If someone would like to give making one a shot, I'd be glad to forward
>> the
>>> link to the artwork.
>> Which country do you live in, ... state, size of the boards,
>> single/double, etc ?? Give us a little more information so that we can
>> help you
>>
>> bye
>> as
>>
>>
>>
>>
>> ------------------------------------
>>
>> Be sure to visit the group home and check for new Links, Files, and Photos:
>> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>>
>>
>>
>>
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> 
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
> 
> 
> 
> 
>

Thank you.  I will contact you off list.

IHS ... Jack


On Wed, May 13, 2009 at 1:51 PM, Alessio Sangalli <alesan@...>wrote:

> I think I could do those for you (for free of course)
>
[snip]


[Non-text portions of this message have been removed]