TT results
2008-11-02 by Brian
I just bought a wireless laserjet printer from Best Buy, Brother HL- 2170W. And, Kodak paper Gloss Instant Dry 48LB 6.5 mil. I did an iron transfer, let it cool, put in cold water for 5 min then pulled off the paper. It looked like there was paper between the traces so I used alochol to clean it off. After etching I tried fingernail polish remover but it was taking too long so I used a scotch scratch pad. It turned out great! I was able to get two traces between the pins of a dip 8 socket with no bridging. See pic below. http://tech.ph.groups.yahoo.com/group/Homebrew_PCBs/photos/view/e6c8?b=1 Brian