Homebrew_PCBs

Here are some tips I used for making double
sided pcbs.

http://www.infiltec.com/seismo/pcb-home.htm

Ciao,

..Dave Saum
My Fun Page
http://www.infiltec.com/inf-fun.htm
My Inexpensive Seismometer Project Page
http://www.infiltec.com/seismo/
My Business Page
http://www.infiltec.com/
My Link Page
http://www.infiltec.com/inf-fave.htm
My Gold Prospecting Near Washington, DC Page
http://www.infiltec.com/gold/

Dave,
Good info and timely, (I have a small board for a hobby project that
I need to make). Was planning to engrave it mechanically but etching
would be lots better. Will use a dremel mounted in a CNC Sherline
mill to drill the holes tho. Didn't know that laser toner would stick
to the copper. Will sure give it a try.
Thanks,
Al
PS Good luck with the list!

--- In Homebrew_PCBs@y..., "davesaum" <dsaum@i...> wrote:
> Here are some tips I used for making double
> sided pcbs.
>
> http://www.infiltec.com/seismo/pcb-home.htm
>
> Ciao,
>
> ..Dave Saum
> My Fun Page
> http://www.infiltec.com/inf-fun.htm
> My Inexpensive Seismometer Project Page
> http://www.infiltec.com/seismo/
> My Business Page
> http://www.infiltec.com/
> My Link Page
> http://www.infiltec.com/inf-fave.htm
> My Gold Prospecting Near Washington, DC Page
> http://www.infiltec.com/gold/