Homebrew_PCBs

Is there a source for manuals for these printers were using Hmmmm
(breaking?) I would also like to know what I may expect to see at the
print head. While trying to clean my C88 I shorted the head. I found
the flat ribbon cable burned at the print head. I cut off the bad part
cleaned it up and it still wont print. The printer shows no trouble and
acts like its printing but alas no. There is ink at the nozzles when I
pull on the syringe.

>Is there a source for manuals for these printers were using Hmmmm
>(breaking?)

you may find something here
http://www.eserviceinfo.com/index.php?what=search2&searchstring=Epson+Stylus+C88%2B
Thomas

--- In Homebrew_PCBs@yahoogroups.com, "Thomas" <teecee@...> wrote:

>
> >Is there a source for manuals for these printers were using Hmmmm
> >(breaking?)
>
> you may find something here
>

http://www.eserviceinfo.com/index.php?what=search2&searchstring=Epson+Stylus+C88%2B

> Thomas
>
> Hi, just joined this group last week ,have modified a Epson CX 3500
> for printing of PCB. Thanks: What a great link , wish i had that
> before I ,tore into my Epson, found service program and parts layout.
> Kym