Yahoo Groups archive
Thread
2006-04-08 by scratch_6057
Alan Marconett I'm still looking for flanged ACME bronze nuts and ACME threaded rods (to match some I have). Try McMaster-Carr @ http://www.mcmaster.com/ start with the word "acme" in the Find Products box then select Acme Hex Nuts This Link Might Work <http://www.mcmaster.com/param/asp/desc.asp? desc=Acme+Hex+Nuts&descid=1529&term=Acme+Hex+Nuts>
2006-04-09 by James M. (Jim) Geidl
You might also try www.barnhillbolt.com . Jim James M. (Jim) Geidl www.spinochio.com 1732 Whitman Road Concord, CA 94518 925 969-1367 The information in this email may be confidential, privileged, and protected from disclosure. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system. Thank You _____
From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] On Behalf Of scratch_6057 Sent: Saturday, April 08, 2006 4:58 PM To: Homebrew_PCBs@yahoogroups.com Subject: [Homebrew_PCBs] Alan Marconett : RE : looking for flanged ACME Alan Marconett I'm still looking for flanged ACME bronze nuts and ACME threaded rods (to match some I have). Try McMaster-Carr @ http://www.mcmaster.com/ start with the word "acme" in the Find Products box then select Acme Hex Nuts This Link Might Work <http://www.mcmaster.com/param/asp/desc.asp? desc=Acme+Hex+Nuts&descid=1529&term=Acme+Hex+Nuts> Be sure to visit the group home and check for new Links, Files, and Photos: http://groups.yahoo.com/group/Homebrew_PCBs If Files or Photos are running short of space, post them here: http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ _____ YAHOO! GROUPS LINKS * Visit your group "Homebrew_PCBs <http://groups.yahoo.com/group/Homebrew_PCBs> " on the web. * To unsubscribe from this group, send an email to: Homebrew_PCBs-unsubscribe@yahoogroups.com <mailto:Homebrew_PCBs-unsubscribe@yahoogroups.com?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . _____ [Non-text portions of this message have been removed]
2006-04-09 by Alan Marconett
Hi ?, I've been looking in McMaster Carr. Just not familiar enough with the parts. It's a 12mm dia ACME thread. Pitch is about .080", which is near 2mm, but not exact. Inch is about 12.44, so I'm not sure what it is! I keep looking. The McMaster Carr prices are quite high! Someone mentioned making an ACME tap from ACME threaded rod, maybe I'll try that. With Delron or a similar material. Another one I have is .375" and 16 TPI, but it's a little light. Alan KM6VV scratch_6057 wrote:
> Alan Marconett > > I'm still looking for flanged ACME > bronze nuts and ACME threaded rods (to match some I have). > > Try McMaster-Carr @ http://www.mcmaster.com/ start with the > word "acme" in the Find Products box then select Acme Hex Nuts > > This Link Might Work > <http://www.mcmaster.com/param/asp/desc.asp? > desc=Acme+Hex+Nuts&descid=1529&term=Acme+Hex+Nuts> >
2006-04-09 by Alan Marconett
Hi Jim, Thanks, I'll check. Alan KM6VV James M. (Jim) Geidl wrote:
> You might also try www.barnhillbolt.com . > > Jim > >