Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-03 21:38 UTC

Thread

Samsung ML-2010 Laser Printer

Samsung ML-2010 Laser Printer

2005-11-30 by robertkardly

Is this printer worth getting,  WalMart has it for $139.72 with a $50 
mail in rebate.. it is supposed to have 1200x600dpi

Re: Samsung ML-2010 Laser Printer

2005-12-01 by bob_ledoux

I have the older ML-1740 printer that I use for toner transfer.  It
works very well, down to .010 wide traces.  The toner in the factory
supplied cartridges is deep and has good adhesion.


--- In Homebrew_PCBs@...m, "robertkardly" <drkardly@h...>
wrote:
Show quoted textHide quoted text
>
> Is this printer worth getting,  WalMart has it for $139.72 with a $50 
> mail in rebate.. it is supposed to have 1200x600dpi
>

Re: Samsung ML-2010 Laser Printer

2005-12-03 by andrew566020

Hi,

If it's any help, I have used the Samsung 2250 (1200*1200 dpi) with
great success.

Regards,

Andy.

--- In Homebrew_PCBs@yahoogroups.com, "bob_ledoux" <bobledoux@p...> wrote:
Show quoted textHide quoted text
>
> I have the older ML-1740 printer that I use for toner transfer.  It
> works very well, down to .010 wide traces.  The toner in the factory
> supplied cartridges is deep and has good adhesion.
> 
> 
> --- In Homebrew_PCBs@yahoogroups.com, "robertkardly" <drkardly@h...>
> wrote:
> >
> > Is this printer worth getting,  WalMart has it for $139.72 with a $50 
> > mail in rebate.. it is supposed to have 1200x600dpi
> >
>

RE: [Homebrew_PCBs] Re: Samsung ML-2010 Laser Printer

2005-12-03 by John Craddock

How about putting this information in the database!
Show quoted textHide quoted text
> -----Original Message-----
> From: andrew566020 [mailto:andy.jrhall@...]
> Sent: 04 December 2005 04:24
> To: Homebrew_PCBs@yahoogroups.com
> Subject: [Homebrew_PCBs] Re: Samsung ML-2010 Laser Printer
> 
> 
> Hi,
> 
> If it's any help, I have used the Samsung 2250 (1200*1200 dpi) with
> great success.
> 
> Regards,
> 
> Andy.
> 
> --- In Homebrew_PCBs@yahoogroups.com, "bob_ledoux" 
> <bobledoux@p...> wrote:
> >
> > I have the older ML-1740 printer that I use for toner transfer.  It
> > works very well, down to .010 wide traces.  The toner in the factory
> > supplied cartridges is deep and has good adhesion.
> > 
> > 
> > --- In Homebrew_PCBs@yahoogroups.com, "robertkardly" <drkardly@h...>
> > wrote:
> > >
> > > Is this printer worth getting,  WalMart has it for 
> $139.72 with a $50 
> > > mail in rebate.. it is supposed to have 1200x600dpi
> > >
> >
> 
> 
> 
> 
> 
> 
> 
> ------------------------ Yahoo! Groups Sponsor 
> --------------------~--> 
> Get fast access to your favorite Yahoo! Groups. Make Yahoo! 
> your home page
> http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/bGYolB/TM
> --------------------------------------------------------------
> ------~-> 
> 
> Be sure to visit the group home and check for new Links, 
> Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
> 
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ 
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 
>