Homebrew PCBs

Hi all,

Anyone in the UK seen/used/have opions on a new addition to the Maplin catalogue...

http://www.maplin.co.uk/Module.aspx?ModuleNo=45927&doy=20m11

Dims: 275 x 205 x 30mm

Includes air pump and heater for only £39.99...

Needs about 2L of etchant and etches in 4mins...

Downside is is says it's 120V so I'm guessing it a US item... but step down converters for the UK are cheap enough, power ratings permitting...

Anyone any thoughts...


Cheers

Kev/.



[Non-text portions of this message have been removed]

Kev  do a search in this group for ET20

Chris

--- In Homebrew_PCBs@yahoogroups.com, "Kev Pearce \(kevp.com\)" 
<lists@k...> wrote:
>
> Hi all,
> 
> Anyone in the UK seen/used/have opions on a new addition to the 
Maplin catalogue...
> 
> http://www.maplin.co.uk/Module.aspx?ModuleNo=45927&doy=20m11
> 
> Dims: 275 x 205 x 30mm
> 
> Includes air pump and heater for only £39.99...
> 
> Needs about 2L of etchant and etches in 4mins...
> 
> Downside is is says it's 120V so I'm guessing it a US item... but 
step down converters for the UK are cheap enough, power ratings 
permitting...

> 
> Anyone any thoughts...
> 
> 
> Cheers
> 
> Kev/.
> 
> 
> 
> [Non-text portions of this message have been removed]
>

Thanks... interesting... maybe not worth it then...

Kev/.

----- Original Message ----- 
From: "Chris Horne" <chris@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Monday, November 21, 2005 12:41 AM
Subject: [Homebrew_PCBs] Re: New cheap UK etchant tank... thoughts...


Kev  do a search in this group for ET20

Chris

In article <007401c5ee27$7125e010$ea83a8c0@thelpearcek>,
   Kev Pearce \(kevp.com\) <lists@...> wrote:
> Hi all,

> Anyone in the UK seen/used/have opions on a new addition to the Maplin catalogue...

> http://www.maplin.co.uk/Module.aspx?ModuleNo=45927&doy=20m11

Certainly looks interesting if I didn't have something else ATM

I have several 280VA mains transformers around with standard (0-120,0-120)
mains primaries - could use one as an auto transformer