Homebrew_PCBs

Has anyone tried it with Eagle?

Hi Mike did you downloaded the demo? If you try it you will like it.
I have not tried it with Eagle but I can say it works great with PcLogic.
The best outline and Gcode, and easy to use.
Derek

-----Original Message-----
From: Mike DeMetz


Has anyone tried it with Eagle?


Be sure to visit the group home and check for new Bookmarks and files:
http://groups.yahoo.com/group/Homebrew_PCBs

To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Hi Mike,

I did, works great!

Alan KM6VV

High Tech wrote:

>
> Hi Mike did you downloaded the demo? If you try it you will like it.
> I have not tried it with Eagle but I can say it works great with PcLogic.
> The best outline and Gcode, and easy to use.
> Derek
>
> -----Original Message-----
> From: Mike DeMetz
>

If you get DeskCNC it has DeskPCB as one of the programs in it. Through
Sunday the 8th you get a free controller board with the purchase of the
software ($50 savings) so that you can use DeskCNC not only as CAM and
toolpath software, but also as a Windows based controller. Visit
www.KTMarketing.com/DeskCNC to get the demo and to purchase online. The
newest version of the software now has the help files for its use.

Tim
[Denver, CO]
Sherline products at Deep Discount
Mach1 and DeskCNC with credit card ordering
www.KTMarketing.com/Sherline

> Hi Mike did you downloaded the demo? If you try it you will like it.
> I have not tried it with Eagle but I can say it works great with PcLogic.
> The best outline and Gcode, and easy to use.
> Derek
>
> -----Original Message-----

Yes I got the demo. I loaded it on my CNC box but it was a day ahead
because time was set to AM instead of PM. This caused a "Clock
setting problem, trying to defeat protection?" error when I ran it.
Re-setting clock per error message didn't help. I contacted IM
Service as per message and their response was "no way to fix that,
try it on another computer". I got it and the DeskCNC demo running on
a laptop now.

--- In Homebrew_PCBs@yahoogroups.com, "High Tech"
<hightechsystems@a...> wrote:

> Hi Mike did you downloaded the demo? If you try it you will like it.
> I have not tried it with Eagle but I can say it works great with

PcLogic.

> The best outline and Gcode, and easy to use.
> Derek
>
> -----Original Message-----
> From: Mike DeMetz
>
>
> Has anyone tried it with Eagle?