RES: [Homebrew_PCBs] Plotter PCB printing
2002-10-03 by Eduardo Perdomo
See my site.. Http://www.geocities.com/pancary Home Build Plotter Driver. ----- Mensagem original ----- De: Firecracker Firecracker [SMTP:aztek@...] Enviada em: quinta-feira, 3 de outubro de 2002 11:56 Para: Homebrew_PCBs@yahoogroups.com Assunto: Re: [Homebrew_PCBs] Plotter PCB printing Yes I tried to work with permanent markers, and I had good results. I used an OHP marker and it worked fine with Ferro chloride.
Show quoted textHide quoted text
----- Original Message -----
From: stuart.lamble@...
To: ledington@...
Cc: Homebrew_PCBs@yahoogroups.com
Sent: Wednesday, October 02, 2002 9:23 AM
Subject: [Homebrew_PCBs] Plotter PCB printing
Hi Larry
I can not seem to find any floor polish that you speak about.
In this country, the only floor polishes that I can find are wax based and
thus rather thick.
Have you tried any permanent markers?
I see on the PCB home page, they use a Staedtler 318 LUMOCOLOR pen.
How does this cope with the Ferro chloride?
Any help is always appreciated.
Thanks
Stuart
Yahoo! Groups Sponsor
ADVERTISEMENT
Be sure to visit the group home and check for new Bookmarks and files:
http://groups.yahoo.com/group/Homebrew_PCBs
To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Be sure to visit the group home and check for new Bookmarks and files:
http://groups.yahoo.com/group/Homebrew_PCBs
To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/