Homebrew PCBs

Aaron's site is back up by the way.
http://www.aaroncake.net/circuits/

I'm going over his schematic getting myself familiar with how things work
and I have a question concerning the motor wiring.
http://www.aaroncake.net/circuits/stepper.htm

There are 6 wires on a unipolar motor, 2 sets of 3 wires.  The center wire
of each set appears to be a common power source.  But how do you go about
deciding the order of the other wires in relation with the schematic?

Ok, I've uploaded a picture in the photo section of the group.  I've created
my photo album and I can't figure out how to add a picture.  It doesn't give
me the add photo icon like it does in the main photo section.  It's a pic of
a unipolar stepper motor wiring.  It should be easy to see, it's the only
pic there 'cause everyone else was smart enough to know how to upload pics
properly.

It's the order of the yellow/orange and black/brown wires that I'd like to
connect properly.  I'd like to avoid creating any magic smoke if at all
possible.

Robert
:)




Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBs

If Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ 
Yahoo! Groups Links