Homebrew PCBs

I was wondering if any of you have come up with a simple automated tool
changing system, or have seen one that is within a "simple man's" reach to
fabricate.

Robert
:)



-----Message d'origine-----
De : Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] De
la part de JanRwl@AOL.COM
Envoyé : juin 12 2005 01:16
À : Homebrew_PCBs@yahoogroups.com
Objet : Re: [Homebrew_PCBs] setting the rings on carbide drills


 
In a message dated 6/11/2005 10:47:00 A.M. Central Daylight Time,  
stefan_trethan@gmx.at writes:

seriously, i want to make bit changing easier. it is a pain to  adjust  
the drill in a pivoting press to just drill through the PCB  each time. I  
will set the ring so it just sits against the collet  and i don't need to  
care for anything.

It will also be of  help with the CNC drill later i suppose. I only need  
like 0.5mm  accuracy.



IC!  That makes it clear.  Logical.  


[Non-text portions of this message have been removed]




Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBs

If Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ 
Yahoo! Groups Links