Homebrew PCBs

I've had that problem on some of the MG Chemical boards.  Overall the 
whole setup works very well.  I've made a lot of boards this way.

http://www.kd7lmo.net/tech_pcb.html



On Wed, 8 Jun 2005, Robert Hedan wrote:

> "Once I peeled off the backing paper, I found that the edge of the board
> wasn't covered in photoresist - in some places a strip of up to an inch of
> copper wasn't covered in resist.  Is this normal??"
> 
> I've never had that from MG Chemicals boards.  The stuff came right up to
> the edge.
> 
> Robert
> :)
> 
> 
> 
> 
> 
> 
> 
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
> 
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ 
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 
> 
> 
> 
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
> 
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ 
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
>