I just checked out Pulsar.gs and I have to admit I'm impressed by the
quality they advertise, and the low cost of their supplies. I'm putting in
an order and going to test their products on my H300.
I also noticed they are using 1/64" PCB, I was using 1/32", no wonder the
laminator was making horrid noises. :D
Robert
:)
-----Message d'origine-----
De : Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] De
la part de frajopea
Envoyé : juin 3 2005 19:46
À : Homebrew_PCBs@yahoogroups.com
Objet : [Homebrew_PCBs] Re: H200 Laminator
Replying to my own post:
I followed the instructions by pulsar.gs and I have successfully transfered
my first pcb.
This is NOTHING like the clothes iron, the toner transfered in a single
pass. I can see myself making lots of boards like this :)
Fp
Be sure to visit the group home and check for new Bookmarks and files:
http://groups.yahoo.com/group/Homebrew_PCBs
Yahoo! Groups Links
quality they advertise, and the low cost of their supplies. I'm putting in
an order and going to test their products on my H300.
I also noticed they are using 1/64" PCB, I was using 1/32", no wonder the
laminator was making horrid noises. :D
Robert
:)
-----Message d'origine-----
De : Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] De
la part de frajopea
Envoyé : juin 3 2005 19:46
À : Homebrew_PCBs@yahoogroups.com
Objet : [Homebrew_PCBs] Re: H200 Laminator
Replying to my own post:
I followed the instructions by pulsar.gs and I have successfully transfered
my first pcb.
This is NOTHING like the clothes iron, the toner transfered in a single
pass. I can see myself making lots of boards like this :)
Fp
Be sure to visit the group home and check for new Bookmarks and files:
http://groups.yahoo.com/group/Homebrew_PCBs
Yahoo! Groups Links