Homebrew PCBs

pcb hole drilling CNC, is what I concluded as input too much
than ouput/earning.

I use hand, good lumination and drilling with a piece of wood as 
backing. I feel it fast and eccurate. 

If I really need such a CNC, I prefer to buy a small CNC milling machine.
I can do lots of other machining job.




----- Original Message ----- 
From: "Stefan Trethan" <stefan_trethan@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Tuesday, May 31, 2005 6:43 PM
Subject: Re: [Homebrew_PCBs] Re: CNC drilling group


> On Wed, 01 Jun 2005 00:17:42 +0200, mycroft2152 <mycroft2152@...>
> wrote:
> 
> > Stephan,
> > Robert's point is well taken. As of now, 90% of this groups photos
> > file size is filled. That only leaves a couple of meg left.
> > Unless Yahoo is planning on expanding all the groups storage, then
> > we will hit the limit soon.
> > Myc
> 
> 
> That does not necessarily mean the discussion needs to be taken away.
> There sure is space to be found somewhere.
> 
> What 'bout cnc_pcb? there is plenty of space.
> I remember when it was created there was a similar discussion. Still i
> find here some good ideas that don't pop up there. Another group is going
> to make that worse. It was made for the very purpose you know, fear this
> list might be clogged up with too many details.
> 
> ST
> 
> 
> 
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs 
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com