More what Phenolic....I got lots of it....
-----Original Message-----
From: Alan Marconett KM6VV [mailto:KM6VV@...]
Sent: Monday, July 22, 2002 6:02 PM
To: Homebrew_PCBs@yahoogroups.com
Subject: [Homebrew_PCBs] Easy to machine circuit board?
Hi to the list,
I'm back from the U.K. and also my (too short) vacation, and anxious to
get 'cuttin!
Just before I left (about a month ago), I cut some small PCB's for a
digitizer probe I built, and the first pieces I cut were Phenolic (some
scrap that I had). Search for my earlier commends "G10 dust".
I wouldn't mind finding some more!
Alan KM6VV
http://groups.yahoo.com/group/Homebrew_PCBs
To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
-----Original Message-----
From: Alan Marconett KM6VV [mailto:KM6VV@...]
Sent: Monday, July 22, 2002 6:02 PM
To: Homebrew_PCBs@yahoogroups.com
Subject: [Homebrew_PCBs] Easy to machine circuit board?
Hi to the list,
I'm back from the U.K. and also my (too short) vacation, and anxious to
get 'cuttin!
Just before I left (about a month ago), I cut some small PCB's for a
digitizer probe I built, and the first pieces I cut were Phenolic (some
scrap that I had). Search for my earlier commends "G10 dust".
I wouldn't mind finding some more!
Alan KM6VV
> From: "rschlierbeck" <scott@...>Be sure to visit the group home and check for new Bookmarks and files:
> Subject: Easy to machine circuit board?
>
> There was a discussion recently about how tough circuit board is to
> machine and how quickly it damages the cutters. I noticed that
> McMaster-Carr has copper clad phenolic board at what looks like a
> reasonable price. Would this phenolic board be easier to cut than
> glass-epoxy board?
>
http://groups.yahoo.com/group/Homebrew_PCBs
To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/