you might look for a nebulizer pump square box thing i see them at second hand stores few bucks beleave it or not they are good pumps i mesured the out put at 40psi i use one for my air brush --- Stefan Trethan <stefan_trethan@...> wrote: > > On Fri, 28 Jan 2005 18:00:38 -0000, > gettingalongwouldbenice > <gettingalongwouldbenice@...> wrote: > > > > > Of course, I can take it out into the garage and > use it > > with the air compressor. But I'd like to have it > usable > > inside. Short of a vacuum cleaner, any > suggestions on how to > > build a blower that can handle a little back > pressure? > > Can you stack fans in series to increase the > pressure capability? > > I envision ten microprocessor fans in a stack and > a funnel on the end. > > Suggestions? > > Thanks, mike > > > can't you run a hose to the garage? > > I made a small shop air system from a fridge > compressor and a empty fire > extinguisher. > The pressure switch was made from a pressure gauge, > 2 light barrier > switches, and some clever transistor logic ;-). You > see, "air on a budget". > > Of course this is very low volume, and i only need > it for a desolder gun. > I don't think it would be enough air for a air wand, > for more than a few > seconds, anyway... > > My gut feeling to the stacked fan thing is that > ain't gonna work. > > The air tools at ebay claim to have a diaphragm > pump, but i somehow don't > see them having much volume. > > ST > > > ------------------------ Yahoo! Groups Sponsor > --------------------~--> > Has someone you know been affected by illness or > disease? > Network for Good is THE place to support health > awareness efforts! > http://us.click.yahoo.com/RzSHvD/UOnJAA/79vVAA/bGYolB/TM > --------------------------------------------------------------------~-> > > > Be sure to visit the group home and check for new > Bookmarks and files: > http://groups.yahoo.com/group/Homebrew_PCBs > Yahoo! Groups Links > > > Homebrew_PCBs-unsubscribe@yahoogroups.com > > > > > > __________________________________ Do you Yahoo!? All your favorites on one personal page \ufffd Try My Yahoo! http://my.yahoo.com
Message
Re: [Homebrew_PCBs] Blower for hot air solder??
2005-01-29 by kenneth magers
Attachments
- No local attachments were found for this message.