Homebrew PCBs

OK, I will ad my two cents: I can sell a bottom portion of the Nuarc 
26 as here http://tinyurl.com/5g4eu for $100 plus shipping. The base 
contains expensive Gast vacuum pump, rubber skirt for vac table and  
glass.

Yes, it can be shipped by UPS but it needs to be packed by a company. 
I have one nearby that doesn't charge much because I know the amount 
of work which goes into packing such item - I have done it once and 
that is enough. Zip 48185, estimate 50 pounds.

The vacuum table is working.

Mike



--- In Homebrew_PCBs@yahoogroups.com, "Brian Chapman" 
<cornbeltroute@a...> wrote:
> 
> I reviewed the list's rules on the home page, it doesn't appear I'm 
> in violation by posting this message. But, I'm not positive. If I 
am, 
> I do apologize. 
> 
> A couple of years ago, I purchased Think and Tinker's $200 UV light 
> exposure kit. I built it, attaching the kit to a PVC pipe frame 
that 
> I built. 
> 
> It works fine, but I also wanted a vacuum exposure frame to hold 
the 
> artwork and resist-coated metal. So, I purchased a portable UV 
light 
> exposure/vacuum system (for more than double the cost - ouch.)
> 
> I am going to auction the Think and Tinker kit built-up unit on 
eBay. 
> But the "UV" messages on this board leads me to think someone here 
> might want the option to buy it before I send the unit to auction.
> 
> Send me an e-mail if interested, and I'll send you photos and 
> additional information when I have it prepared.
> 
> Thanks much,
> 
> Brian
> 
> Brian Chapman
> Cedar Rapids, Iowa
> 
> cornbeltroute@a...
> 
> ---