Those are interesting posts. Then using one of those dimmer switches
would lower the voltage to test it, right? Mike
would lower the voltage to test it, right? Mike
--- In Homebrew_PCBs@yahoogroups.com, "mikezcnc" <eemikez@c...> wrote:
>
> I have a laserjet fuser and an curious if voltages used for the
> heating element are fairly similar. I traced from the circuit and
it
> appears that it is a 120V AC. Is this what you have in your fusers?
>
> And if so then for the test purposes have you tried to apply that
> voltage to the fuser? Mike