Homebrew PCBs

I am working with a fuser of a HP 4L printer for my laminator. This printer 
have two models of fuser: one for 110v a other for 220v. I understand that 
if the printer is for 220v, then the fuser to work directly with the 220v. 
This is my case.

Esteban Arias
earias@...



At 02:37 a.m. 11-11-2004, you wrote:


>I  have a laserjet fuser and an curious if voltages used for the
>heating element are fairly similar. I traced from the circuit and it
>appears that it is a 120V AC. Is this what you have in your fusers?
>
>And if so then for the test purposes have you tried to apply that
>voltage to the fuser?  Mike
>
>
>
>
>
>
>Be sure to visit the group home and check for new Bookmarks and files:
>http://groups.yahoo.com/group/Homebrew_PCBs
>Yahoo! Groups Links
>
>
>
>