Homebrew PCBs

Somebody finally did it.  It sure took long enough.  I suggested this approach over 15 years ago when I was in the duPont electronics department.  Of course I couldn't get mamagement to look beyond their current product line.  I'd like to think that our ink jet guys make the inks, but probably not.
  ----- Original Message ----- 
  From: thespeakerguy 
  To: Homebrew_PCBs@yahoogroups.com 
  Sent: Tuesday, November 02, 2004 2:56 AM
  Subject: [Homebrew_PCBs] Did you see the epson press release? Inkjet PCB!



  http://www.epson.co.jp/e/newsroom/news_2004_11_01.htm

  This prints conductors and insulating layers in subsequent passes.

  Time will tell if this is viable and also can trickle down into a 
  hobbyists's realm. The specs are neat.

  50 micron line width, 110 micron line pitch, at 25.4 microns per 
  mil, that is 2 mil width on 4.4 mil pitch. Do that with your Staples 
  paper!





  Be sure to visit the group home and check for new Bookmarks and files:
  http://groups.yahoo.com/group/Homebrew_PCBs 


        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       


------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/Homebrew_PCBs/
      
    b.. To unsubscribe from this group, send an email to:
    Homebrew_PCBs-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]